Skip to product information
Cable Gland Blanking Plug M22 × 1.5 (Sealing / Cap Plug)
GH₵3.80
GH₵4.50
Pickup currently not available
Detailed Description
A high-performance blanking (sealing) plug designed to seal off unused M22 × 1.5 threaded cable entry holes. Suitable for maintaining enclosure integrity by preventing ingress of dust, moisture or contaminants in electrical enclosures, junction boxes, control panels, or mechanical housings.
Key Specifications & Features
| Feature | Typical Value / Notes |
|---|---|
| Thread | M22 × 1.5 metric (male) |
| Type | Blanking / sealing plug |
| Material Options | Brass (sometimes nickel-plated), or plastic / nylon / polyamide |
| Working / Test Pressure | Some hydraulic / instrumentation blanking plugs of M22 × 1.5 design are rated to 400 bar |
| Dimensions | According to DIN02222 standard for M22 × 1.5 male blanking plug: Ø F (outer diameter) ~ 27 mm, length L2 ~14 mm, L1 ~19 mm, wrench flat S1 ~10 mm |
| Operating Conditions | Depends on material and seal (“O-ring”) design |
| Sealing / Protection | When properly constructed with sealing gasket/O-ring, it can maintain enclosure ingress protection |
| Use Cases | Sealing off unused threaded holes, retaining IP rating of enclosure, temporary or permanent closure of cable entry points |
Installation / Usage Notes
-
Ensure mating threads are clean and undamaged.
-
Insert plug into the threaded entry and tighten so that any sealing element (O-ring or gasket) is compressed to form a secure barrier.
-
Avoid over-torqueing, which may damage the plug or thread.
-
Choose the material (brass vs plastic) appropriate for the environment (corrosive, temperature extremes, mechanical stress).
Shop Online
