No products in the cart.
Only this weekend
Super Discount
Items on sale this week
Top picks this week. Up to 50% off the best selling products.
Phoenix Contact Plug-in octal relay in basic design with power contacts, 3 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 24 V AC
| Service life electrical | see diagram |
| Test voltage (Winding/contact) | 2.5 kVrms (50 Hz, 1 min., winding/contact) |
| Test voltage (Changeover contact/changeover contact) | 2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact) |
| Air clearances and creepage distances | |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage | 2.5 kV |
| Coil side | |
| Nominal input voltage UN | 24 V AC |
| Input voltage range | 20.4 V AC ... 31.2 V AC |
| Input voltage range in reference to UN | see diagram |
| Mains frequency | 50/60 Hz |
| Drive and function | monostable |
| Drive (polarity) | non-polarized |
| Typical input current at UN | 93 mA |
| Typical response time | 5 ms ... 15 ms |
| Typical release time range | 5 ms ... 20 ms |
| Coil voltage | 24 V AC |
| Status display | LED (yellow) |
| Coil resistance | 83 Ω ±10 % |
| Switching | |
| Contact switching type | 3 changeover contacts |
| Type of switch contact | Single contact |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 12 V (10 mA) |
| Limiting continuous current | 10 A |
| Maximum inrush current | 20 A (20 ms, N/O contacts) |
| Min. switching current | 10 mA (12 V) |
| Interrupting rating (ohmic load) max. | 240 W (24 V DC) |
| 96 W (48 V DC) | |
| 72 W (60 V DC) | |
| 50 W (110 V DC) | |
| 55 W (220 V DC) | |
| 2500 VA (250 V AC) | |
| Switching capacity min. | 120 mW |
| Connection method | Plug-in connection |
Reviews
There are no reviews yet.