EMD-BL-PTC-PT – Monitoring Relay 2906253

In Stock
2,700.00
In Stock
Other people want this. 4 people have this in their carts right now.

Description

Phoenix Contact Temperature monitoring of the motor winding (maximum 6 PTCs) for temperature sensors according to DIN 44081 and DIN 44082 with short-circuit monitoring of the thermistor circuit, with push-in connection

Product type Temperature monitoring relay
Number (PTC sensor) 6 (1 x 6 PTCs)
Operating mode 100% operating factor
Mechanical service life 15x 106 cycles
Insulation characteristics
Overvoltage category III
Pollution degree 2

Electrical properties
Service life electrical 1x 105 cycles
Rated surge voltage 4 kV
Supply
Supply voltage 230 V AC (-15 % … +10 %)
Supply voltage range 195.5 V AC … 253 V AC
Nominal power consumption 3.5 VA (0.5 W)

Input data
Input name Measuring input
Maximum input voltage 4 V DC (connection terminal blocks: T1 and T2)
Frequency range 50 Hz … 60 Hz
Maximum temperature coefficient < 0.05 %/K
Response delay < 100 ms
Switch-on delay < 450 ms
Response value ≥ 3.6 kΩ (Relay drops out)
Function Winding temperature monitoring
Basic accuracy ± 10 % (of scale end value)
Total cold resistance ≤ 1.5 kΩ
Release value ≤ 1.6 kΩ (Relay picks up)
Short-circuit detection < 20 Ω
Recovery time > 300 ms
Control
Reset Autoreset

Output data
Switching
Contact switching type 1 floating changeover contact
Maximum switching voltage 250 V AC (in acc. with IEC 60947-5-1)
Interrupting rating (ohmic load) max. 1250 VA (5 A / 250 V AC)
Output fuse 5 A (fast-blow)

Connection data
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section rigid 0.14 mm² … 2.5 mm²
Conductor cross section flexible 0.14 mm² … 2.5 mm²
Conductor cross section AWG 26 … 14

Dimensions
Width 17.5 mm
Height 89.5 mm
Depth 65.5 mm

Material specifications
Color gray (RAL 7042)
Housing insulation material Polyamide PA 6.6, self-extinguishing

Reviews

There are no reviews yet.

Be the first to review “EMD-BL-PTC-PT – Monitoring Relay 2906253”

Your email address will not be published. Required fields are marked *